A Reliable Gas Wall Heater for Modern & Traditional Buildings

The DRU Art 2 Balanced Flue Gas Wall Heater is a compact, reliable and efficient heating solution for homes and commercial buildings. Manufactured by DRU, a long-established European heating manufacturer, the Art 2 combines proven wall-mounted gas heating with balanced flue technology to provide quiet, comfortable warmth without requiring a traditional chimney or mains electricity.

Delivering up to 2.4kW of heat output on Natural Gas and 2.0kW on LPG, the DRU Art 2 is ideal for smaller rooms and areas requiring supplementary heating. Its compact wall-mounted design makes it particularly suitable for homes, churches, schools, offices, workshops, outbuildings and other commercial or institutional environments.

The DRU Art 2 uses a balanced flue system incorporating two concentric tubes. Fresh combustion air is drawn into the heater from outside through the outer section, while combustion gases are safely expelled through the inner flue.

This sealed combustion system means the heater does not use air from the room for combustion, making it a practical solution for properties where a conventional open-flued appliance is unsuitable.

The heater operates using natural convection, distributing warmth quietly and evenly throughout the room without requiring a fan or electrical connection.

One of the key benefits of the DRU Art 2 is its ability to operate without a mains electrical supply. Manual battery-powered piezo ignition provides straightforward starting, while the integral thermostat helps regulate room temperature and maintain comfortable conditions.

This makes the Art 2 particularly useful in buildings where electrical connections are limited or where an independent heating system is required.

The heater can also be connected to an automatic time clock, providing additional control and convenience where required.

The DRU Art 2 is an excellent modern alternative for customers looking to replace an older Baxi Brazillia wall heater with a contemporary balanced flue gas appliance.

Its compact dimensions, simple operation and flexible flue options make it suitable for a wide variety of replacement and new installation applications.

It can provide effective heating in:

• Churches and chapels
• Vestries
• Schools and classrooms
• Offices
• Conservatories
• Workshops
• Outbuildings
• Community buildings
• Domestic properties
• Commercial premises

The DRU Art 2 is available for Natural Gas, with LPG compatibility available through the appropriate conversion. It provides a heat output of up to 2.4kW on Natural Gas and 2.0kW on LPG, making it suitable for a wide range of smaller heating applications.

With an efficiency of up to 78%, the Art 2 provides effective room heating while maintaining the straightforward operation associated with traditional gas wall heaters.

Unlike fan-assisted heaters, the DRU Art 2 uses natural convection to distribute heat throughout the room. This provides quiet operation without the noise associated with an electric fan.

The heat distribution is designed around approximately 85% convection and 15% radiant heat, providing a combination of gentle background warmth and direct heat.

The heater reaches maximum output within approximately 30 minutes, allowing rooms to warm efficiently when heating is required.

The DRU Art 2 features a durable steel casing with a classic beige enamel finish, making it particularly well suited to traditional, institutional and functional interiors.

Its compact construction and approximately 11kg weight allow it to be installed without occupying valuable floor space, while the robust Ceramet-coated heat exchanger is designed for long-lasting performance.

Optional internal and external heater guards are available for installations where additional protection is required, including schools, churches, workshops and other high-traffic environments.

The DRU Art 2 can accommodate a range of installation requirements thanks to its flexible balanced flue options.

A telescopic balanced flue kit can accommodate wall thicknesses from approximately 250mm to 440mm, while a rigid 600mm flue kit is available for thicker wall constructions.

The wider Art Series installation range can accommodate wall thicknesses from approximately 70mm to 980mm, subject to the appropriate flue configuration and installation requirements.

Key Features:

• DRU Art 2 balanced flue gas wall heater
• Up to 2.4kW heat output on Natural Gas
• Up to 2.0kW heat output on LPG
• Efficiency of up to 78%
• No mains electricity required
• Manual battery-powered piezo ignition
• Integral modulating thermostat
• Quiet natural convection heating
• Balanced flue sealed combustion system
• Natural Gas or LPG compatible
• Classic beige enamel finish
• Durable steel construction
• Approximately 11kg weight
• Telescopic and rigid flue options
• Optional internal and external heater guards
• Suitable for domestic and commercial applications
• Ideal replacement for Baxi Brazillia wall heaters
• Suitable for churches, schools, offices and outbuildings
• Can be connected to an automatic time clock
• 2-year manufacturer's warranty

For customers looking for a compact balanced flue gas wall heater, the DRU Art 2 provides a practical combination of reliable heating, simple operation and flexible installation.

With no mains electricity requirement, quiet natural convection, Natural Gas and LPG compatibility and a choice of flue configurations, the Art 2 is particularly well suited to churches, schools, offices, homes, workshops and other buildings requiring dependable independent heating.

Whether replacing an older Baxi Brazillia heater or installing a new gas wall heater, the DRU Art 2 provides discreet, dependable warmth without the need for a traditional chimney or electrical supply.

Installation Manual

Please note all frames, accessories, and flue components are non-refundable.

GUARANTEE

All DRU products meet the strictest quality requirements. Each fire or stove undergoes numerous meticulous tests before leaving the factory. The guarantee duration on model components is two years.

It may however arise that you experience a problem with your fire or stove. If this is the case please contact your dealer or installer: state your model's serial number; this is a ten digit number listed on the name plate. Your dealer or installer will try to resolve the problem.

When trying to resolve the problem your supplier may request advice or the subsequent delivery of components (under guarantee) from DRU. Should any problems arise the supplier can contact the DRU Service Desk. One of our engineers will come to your home to resolve the problem. If the model is still under guarantee and has been installed and used as per the guidelines, this service will naturally be free of charge.

DRU delivers components necessary for the functioning of the model up to 10 years after the termination of the last product range.

If you have any questions regarding our products or services please contact us. We will do our utmost to answer your query as comprehensively and quickly as possible.